logo junying metal fabrication已改1
FINISHING SERVICES

Vapor Polishing

At a glance

Applicable Materials

Colors

Applications

Thickness
Aluminum
Clear, Gold
Tools, hardware, electrical systems
0.25-1.0 µm0.00001-0.00004 inches

About the Process

Chromate conversion coating, more commonly known as chem film or by its brand name Alodine, is a chemical coating that passivates and protects aluminum from corrosion. It is also used as a base layer before priming and painting parts. The standard most commonly specified in engineering applications is MIL-DTL-5541F, which refers specifically to coating of aluminum alloys.

This protective layer is much thinner than an anodizing layer, and while both are created by immersion of parts into a bath, Alodine is a simple chemical coating and the process does not use electrical current.

Alodine is a slightly cheaper process than anodizing, though it is more prone to scratches, wear, and cosmetic damage. The most common color of the coating is an iridescent greenish-gold, and thus it may also be used for cosmetic purposes. However, this color comes from hexavalent chromium, which is toxic, so for RoHS compliance needs, there are clear versions of the coating available as well.

 

Design considerations

  • Plugging threaded/reamed holes not required unless tolerances are very tight, as thickness change is minimal.
  • Alodine coatings offer a much greater electrical conductivity than bare aluminum
  • Media Blast parts before Alodine to create a more consistent coating that hides small machine marks
YOU MIGHT ALSO BE INTERESTED IN
CNC Programming

CNC Machining: Macros, Subprograms, and Parametric Programming

CNC (Computer Numerical Control) machining is an automated, subtractive manufacturing process where a CNC machine is controlled with a set of commands that, when followed, will produce a part. CNC operators create….

pound a peg

Too Tight or Perfect Fit? When to Use Press Fits in Assemblies

example dowel pin interference fit table