logo junying metal fabrication已改1
3D PRINTING MATERIALS

Accura ClearVue

At a glance

ProcessLead TimeColorsResolutionPriceApplications
FDM 3D printing24 hoursBlack, Blue, Neutral, Red, White0.25 mm$$Strength & complex geometries

About the Material

Plastic material called Accura ClearVue is excellent for early-stage rough prototypes and mechanical strength. For initial prototype applications, Accura ClearVue is a reasonably priced material that, with post-processing choices, can provide a better surface polish than PLA.

Material Properties

 

Tensile Strength

Elongation at Break

Modulus of Elasticity

Flexural Strength

31 MPa (XZ Axis), 26 MPa (ZX Axis)
6%
2200 MPa (320000 PSI)
58 MPa (8450 PSI)

Material Finish

Low-resolution (0.1 mm) layering gives Accura ClearVue a matte look with distinct extrusion lines. Black, White, and Neutral are the three hues of Accura ClearVue, each of which has a slightly different finish.

Accura ClearVue resembles the finish of black PLA and is a little bit more polished than its Neutral and White cousins.

The least shining of the three is White ABS, whereas Neutral Accura ClearVue has a more milky appearance.

Design Recommendations

 

Max Part Size [x, y, z]

Min Clearance + Gaps for Fit

Min Wall Thickness

500 x 500 x 500 mm
0.5 mm
1 mm min
  • Internal Cavities: All internal cavities will have support material inside.
  • Threads and Inserts: For Accura ClearVue, we recommend you use heat stake inserts. For more information, check out our article on The Best Fasteners for 3D Printed Parts.
  • Text Guidelines: Engraved text (indented) is recommended over embossed, since ABS is not able to capture fine details very well.
YOU MIGHT ALSO BE INTERESTED IN
US injection molding 11 1

Material Options for Stereolithography (SLA) 3D Printing

Stereolithography (SLA), the technology used to produce them, supports the creation of plastic parts with tight tolerances, intricate geometries, and smooth surface finishes. And parts printed using SLA stand out because of their exceptional accuracy, resolution, and level of detail. One key advantage of SLA is its ability to achieve finishes that are both highly […]

US injection molding 11 1

Scaling Up: From 3D Printed Prototypes to Injection Mold-Ready Designs

Are you ready to scale up from 3D printing to injection molding? Then it’s time to tailor your part design for a process that uses metal tooling and has its own unique design requirements. This article begins with some injection molding basics and then explains how to optimize your part design to reduce tooling costs […]