logo junying metal fabrication已改1
3D PRINTING MATERIALS

Polypropylene

At a glance

ProcessLead TimeColorsResolutionPriceApplications
FDM 3D printing24 hoursBlack, Blue, Neutral, Red, White0.25 mm$$Strength & complex geometries

About the Material

ABS is a plastic material that’s great for mechanical strength and early stage rough prototypes. ABS is a cost-effective material for initial prototyping applications, and with post-processing options it can offer better surface finish than PLA.

Material Properties

 

Tensile Strength

Elongation at Break

Modulus of Elasticity

Flexural Strength

31 MPa (XZ Axis), 26 MPa (ZX Axis)
6%
2200 MPa (320000 PSI)
58 MPa (8450 PSI)

Material Finish

ABS has a matte finish with distinguished extrusion lines as the result of low-resolution (0.1 mm) layering. ABS comes in three colors, which each vary slightly in terms of finish: Black, White, and Neutral.

Black ABS is somewhat more shiny than its Neutral and White counterparts and is comparable to the finish of black PLA.

ABS in color Neutral has a more milky finish, while White ABS has the least shiny finish of the three.

Design Recommendations

 

Max Part Size [x, y, z]

Min Clearance + Gaps for Fit

Min Wall Thickness

500 x 500 x 500 mm
0.5 mm
1 mm min
  • Internal Cavities: All internal cavities will have support material inside.
  • Threads and Inserts: For ABS, we recommend you use heat stake inserts. For more information, check out our article on The Best Fasteners for 3D Printed Parts.
  • Text Guidelines: Engraved text (indented) is recommended over embossed, since ABS is not able to capture fine details very well.
YOU MIGHT ALSO BE INTERESTED IN
US injection molding 11 1

Material Options for Stereolithography (SLA) 3D Printing

Stereolithography (SLA), the technology used to produce them, supports the creation of plastic parts with tight tolerances, intricate geometries, and smooth surface finishes. And parts printed using SLA stand out because of their exceptional accuracy, resolution, and level of detail. One key advantage of SLA is its ability to achieve finishes that are both highly […]

US injection molding 11 1

Scaling Up: From 3D Printed Prototypes to Injection Mold-Ready Designs

Are you ready to scale up from 3D printing to injection molding? Then it’s time to tailor your part design for a process that uses metal tooling and has its own unique design requirements. This article begins with some injection molding basics and then explains how to optimize your part design to reduce tooling costs […]